Tanses: Sun: TT-40, TT-45, TT-50, TT-55 VLR- VLR cabins.


		Model TT-10Q

Back to Suntanning Main Page

TT-Vertical Tanner technical specifications LOW PRESSURE (VHR/VLR Technology)
Model Name	TT-40-VHR	TT-45-VHR	TT-50-VHR	TT-55-VHR
Number of Lamps	40 VHR	45 VHR	50 VHR	55 VHR
Lamp Power	160W	160W	160W	160W
Power Input	7600W	8400W	9800W	10800W
Required breaker	50Amp	50Amp	60Amp	70Amp
Max. FDA exposure	10 min.	10 min.	10 min.	10 min.

Model Name	TT-40-VLR	TT-45-VLR	TT-50-VLR	TT-55-VLR
Number of Lamps	40 VLR	45 VLR	50 VLR	55 VLR
Lamp Power	100W	100W	100W	100W
Power Input	4500W	5100W	5600W	6100W
Required breaker	30 Amp.	40 Amp.	50 Amp.	50 Amp.
Max. FDA exposure	10 Min.	10 Min.	10 Min.	10 Min.

Input voltage	220/240 VAC,60Hz, (50 HZ is available upon request)
Lamp type	Reflector
Reflector	Aluminum diffusive pattern reflectors all around
Lamp configuration	Staggered for maximum ankle and shoulder tan
Cabin inner dia.	31" DIA
Cabin outer dia.	47.5" DIA
Cabin height inside	80"
Cabin height out.	91.5"
Door type	Double swing out type; on bronze bearings
Entrance width	29" wide entrance
Ballasts	Cosmedico, VHR/VLR, choke type
Ballasts Location	Incorporated into design(No external boxes)
Cooling	High pressure impeller type, placed on the top air inlet is through 2520 holes on the floor section. Ballasts are cooled by convection and their heat is dissipated to outside of cabin.
Lamp Protection	1/4" Dia. steel wire grid (no acrylic sheets)
Timer	Available with mechanical, or Data base 24 volt, push button and emergency stop. A totalizer type hour counter is mounted on the ceiling.
Arm rest bars for underarm tanning	Thick steel bars for easy cleanig
Dust prevention	Dust collection box in the floor with easy access for vacuuming; removable impeller grills for easy cleaning.
Finishing	Gold color anodized aluminum extrusion finish and baked powder coated steel sheetparts Assembled with screws only (No welding) No plastics No wood particies panels Only metal components for maximum heat dissipation and highest fire retardant qualities

State-of-the-art technology and
high performance workmanship

Unparalleled tanning of ankles and shoulders by the use of staggered lamp design.
Ultra-performing, low power consumption 55-160 watts lamps.
Genuine Cosmedico VHR lamps and choke ballasts.
Easy access double-swing doors.
Floor dust collection chamber results in dust-free environment
All metal construction provides strength and durability.
Even heat dissipating and fire retardant casing.
Avant-garde technology boosts self-cooling, trouble-free ballast technology.
Ergonomically contoured cabin for all-around tanning power.

WHY We don’t use acrylic sheets in our cabins with low pressure VHR lamps?

1) A cabin is made for low maintenance such as; not cleaning the smudges on acrylic sheets after each customer which is very difficult in a small space for the salon employee.

2) A regular brand new acrylic sheet cuts UVA, UVB by 8% The UVA transmissivity is lost up to 20 % in two weeks if the collecting dust is not cleaned off the inner side of the acrylic sheet.

3) All acrylic sheets cut off some of the UVB region which is very important for that extra tan.

4) Replacing acrylic sheets at least every two years cost the owner.

That is why all serious cabins are made without the acrylic sheets. Having a cabin with acrylic sheets instead of strong steel grids is like; installing brand new lamps with a loss of 200 hours to begin with in terms of performance.